Wire drawing machines are used to reduce the diameter of difficultly transformable wire by drawing.

Ito-Sin produces these special drawing machines for for drawing copper and aluminum or alloy wire with high speed.

Depending on the operation purpose and the customer’s requirements, before the drawing process these wires are heated up to the necessary temperature in-line either through indirect resistance heating, through gas fired heating or inductive heating. Temperatures between 300 and 700°C are possible. Additionally, the drawing dies are heated, in order to avoid that the wire is cooled off at this place.

With single or multiple hot wire drawing machine of different sizes and with drawing capstans of 80 to 1250 mm wire in a range of 6.0 to 0.008 mm can be drawn.

Special features of wire drawing machines:

1. Extremely flexible solutions with a wide range of possible on figurations depending on the customer’s requirements.
2. Multimotor technology with intermediate slip recovery for energy saving and better wire quality.
3. User-friendly design and full access to the work area for easy string-up.
4. More stability, high production efficiency, low noise and easy to operation.

5. Quick die change system for dies quantity saving 30%,Two clutches for faster speed.

Wire drawing machine include water seal cooling system, so the temperature of the machine will not to high, it is safe to the worker. By having this machine, you will only have to buy the rod in its primary state and you will be able to reduce its diameter for all kinds of uses. Whether you market wire in different diameters or manufacture various types of mesh, our wire drawing machine is indispensable to work with all possibilities of diameters.