-
Jul 23, 2021
1) Take-up and pay-off device In order to improve the quality of the stranded wire, reduce labor intensity, and shorten the estimated ground length of the frame stranding machine, walking type take-up and pay-off devices have been generally used to replace the past fixed take-up and pay-off racks. 2) Threading die The threading die is a vulnerable part in the Rigid Frame Strander. The original bak...
view more
-
Jul 12, 2021
Commonly used stranding machines include tubular stranding machine, Rigid Frame Strander, cage stranding machine, disc stranding machine, and fork-type stranding machine. Its production capacity varies. Tubular stranding machine: a production equipment that completes the stranding function by the rotary motion of a tubular revolving body. The floating frame for placing each pay-off reel is install...
view more
-
Jul 08, 2021
This type of copper rolling mill is used for cold-rolled billet and finish-rolled products of brass, red copper, tin bronze and other non-ferrous metals. The unit consists of the main engine and the transmission part, the winder, the unwinder, the imported guide position, and the front and rear devices of the machine. Fully automatic control technology, perfect after-sales service, and reasonable ...
view more
-
Jul 01, 2021
In the wire and cable industry, stranded wire is the basic process for the production of overhead wires and electric conductive cores, and it is also one of the main links in quality control. There are many types of stranding machines. Frame type stranding machine is one of them for nearly 25 years. The introduction, digestion, absorption, innovation and improvement of frame stranding machine have...
view more
-
Jun 07, 2021
The LFD450/11 non-sliding aluminum alloy large drawing machine mainly draws φ9.5mm material rods into wires with various material characteristics, specifications and cross-sectional shapes. Each drawing drum of this Wire Drawing Machine is driven by an independent motor, and the elongation of each pass can be adjusted arbitrarily according to the characteristics of the drawing material and the cro...
view more
-
Jun 04, 2021
In order to improve the product quality and productivity, lower energy consumption, now cable industry gradually continuous annealing mode instead of the original tank annealing. Continuous annealing working principle is to use a certain length of copper wire the two positive and negative electrode copper wheel directly short circuit, because the resistance of the copper wire is quite low and in l...
view more
-
May 27, 2021
The wire drawing machine produced is a production equipment deployment consisting of multiple drawing heads. Through drawing step by step, the steel wire can be cold drawn to the required specification at one time. In order to ensure the synchronous operation of each drawing head, Yidong New Wire Drawing Machine dynamically measures the tension of the steel wire between each drawing head through a...
view more
-
May 18, 2021
With the needs of modern production management, the use of high-speed and high-efficiency production equipment to improve product quality, reduce energy consumption and production costs is the need for the development of the wire and cable manufacturing industry. Users will also put forward higher requirements for the equipment itself and extended after-sales service in terms of high efficiency, l...
view more
-
May 14, 2021
The full name of continuous casting and rolling is continuous casting and continuous rolling, which is to pour liquid steel into a continuous casting machine to cast a slab (called continuous casting slab), and then directly enter the hot continuous after keeping it in a soaking furnace without cooling. The steel rolling process of rolling in the rolling mill. This process cleverly combines the ca...
view more
