-
Mar 02, 2020
This blog will continue to introduce the composition of copper rod continuous casting and rolling line type UL + Z-1820 + 255/12 (4 + 6 + 2). This blog and the previous blog are designed to enable customers to better understand the relevant information of copper rod continuous casting and rolling line type UL + Z-1820 + 255/12 (4 + 6 + 2), and provide reference materials for customers to purchase ...
view more
-
Feb 26, 2020
Rod Rolling Machine is one of the company's products with good reputation and favored by customers. This blog will introduce the composition of copper rod continuous casting and rolling line type UL + Z-1820 + 255/12 (4 + 6 + 2), so that customers can learn more about the details of the product. The composition of copper rod continuous casting and rolling line type UL + Z-1820 + 255/12 (4 + 6 + 2)...
view more
-
Feb 20, 2020
The copper rod continuous casting and rolling line is to use electrolytic copper or copper scraps as raw materials and adopt the continuous casting and rolling process to produce large-length glossy copper rods for use in the wire and cable industry. Compared with the traditional process (casting, heating and rolling), the continuous casting and rolling process combines the two processes of castin...
view more
-
Feb 16, 2020
The copper rod continuous casting and rolling line is an important process usually used in the wire and cable industry. It was jointly developed by CERIS, Shanghai Smelter, Nanchang Nonferrous Metallurgical Design Research Institute and SIMEE. The principle of this process is to use the national standard No. 1 electrolytic copper and the national standard No. 2 pure copper waste wire as raw materi...
view more
-
Feb 01, 2020
This blog continues from the previous blog to continue to explain the main components of the LHD-450 / 13-2 double-head copper pull machine. 6. Annealer 1) Application: To be equipped with the copper rod breakdown machine, it is capable of producing Φ1.35~Φ3.5mmsoft wire by means of continuous annealing. 2) Main technical data (water tank placed outside) : General: Type: AC resistor continuous ann...
view more
-
Feb 01, 2020
In the traditional single-head copper wire drawing and stranding process, each copper wire is drawn on a single-head copper wire drawing machine, and then is wound on a reel separately and then released in the next strand. For example, if you need to produce 2 copper wires at the same time, you need 2 single-head copper wire drawing machines. In contrast, if a double-head copper wire drawing machi...
view more
-
Jan 16, 2020
The copper wire drawing machine is a machine that uses the ductility of the copper wire to reduce its diameter through the compression of die to achieve the desired wire diameter. According to the number of drawing heads at one time, it can be divided into single-head copper wire drawing machine, double-head copper wire drawing machine and multi-head copper wire drawing machine; according to the s...
view more
-
Jan 08, 2020
The first two blogs introduced eight main features of continuous lead extruders. This blog will introduce the features of the remaining main components (take the YQL-Φ100 / 5 continuous lead extruder as an example): 9. Rear Water Cooling System It consists of cooling water spraying pipe and subsequent spraying pipe for stainless steel laundry, which can make the second cooling for the crystallizat...
view more
-
Jan 03, 2020
This blog continues from the previous blog to take the YQL-Φ100 / 5 continuous lead extruder as an example to introduce the main components of the continuous lead extruder： 6. 100/5 type extrusion host Description Parameter Nominal dia. of extruding screw Φ100mm Screw rotating speed 5～15rpm Extruding capacity 9～12kg/min Main motor for extruder 55kW（AC frequency conversion） Small die stock Φ6...
view more
